Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Txtm
Part: Light bulb

In today's video, you will learn how to replace the halogen front bulb of the motorcycle in question. Specifically, a new LED unit will be installed. First, obtain the specific replacement part, available from major online spare parts sites or physical shops. Once you have this, you can proceed. Work exclusively with the motorcycle cold, meaning it has been off for several hours. Start by removing the front cover that conceals the headlamp. You can then access the bulb compartment and replace the unit with a new one. Test its operation, and if everything is okay, reassemble.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Keeway TXM 125?
How to Replace the Front Headlamp Bulb on the Keeway TXM 125?
Txm 125 To replace the front headlamp bulb on the Keeway TXM 125, loosen all the screws located near the fork and on the inside of the front fairing, as indi…
How do you replace the headlight bulb of the Keeway RKV 200?
How do you replace the headlight bulb of the Keeway RKV 200?
Rkv 200 In order to replace the headlight bulb of the Keeway RKV 200, you need to loosen the screws that secure the front fairing of the motorcycle to its ho…
How do you replace the headlight bulb of the Keeway SIP 125?
How do you replace the headlight bulb of the Keeway SIP 125?
Sip 125 In order to replace the headlight bulb of the Keeway SIP 125, you need to loosen the screws that secure the front fairing of the motorcycle: these sc…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos