Do it yourself
Frequently asked questions about cars and motorcycles
To replace the headlight bulb on the Keeway Superlight 125, loosen the screws around the lens of the headlight so that it can be removed from its housing. Once the headlight has been extracted, disconnect the connectors at the back and also remove the bulbs from inside; after removing the old bulbs, insert the new ones by securing the headlight in its place and connecting it to the connectors. After installation, check that the lights illuminate correctly.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Superlight 125 This guide shows how to disassemble and replace the headlight bulb on the Keeway Superlight 125 motorcycle. First, put the bike on its centre stand a…
Superlight 125 To replace the headlight bulb of the Keeway Superlight 125, you need to loosen the screws that secure the headlight assembly to its housing: this wil…
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos