Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to disassemble and replace the headlight bulb on the Keeway Superlight 125 motorcycle. First, put the bike on its centre stand and start unscrewing the fixing screws of the metal frame of the front headlight; then remove the optical unit and disconnect the electrical connector of the bulb to remove it, as shown in the video. At this point, replace the bulb with a new one of the correct type and with the same fitting; then install the new light onto the optical unit and reassemble everything, following the reverse procedure!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Keeway Superlight 125?
How do you replace the headlight bulb of the Keeway Superlight 125?
Superlight 125 To replace the headlight bulb of the Keeway Superlight 125, you need to loosen the screws that secure the headlight assembly to its housing: this wil…
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to replace the headlight bulb on the Keeway Superlight 125?
How to replace the headlight bulb on the Keeway Superlight 125?
Superlight 125 To replace the headlight bulb on the Keeway Superlight 125, loosen the screws around the lens of the headlight so that it can be removed from its hou…

How to Replace the Air Filter on the Benelli TRK 502X?

On the Benelli TRK 502X, you can replace the air filter by unscrewing the screws that secure the fairings located on the front side of the bike, near the tank: once these panels are removed, proceed by loosening the screws that secure the tank and disconnecting all the hoses and connectors underneath. This will give you access to the air filter box, which can be opened by loosening the screws that secure the cover: at this point, remove the old filter so that you can insert the replacement.

Watch the video!


by ScegliAuto

More videos