Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Cafe Racer 152
Part:

In this guide, we will see the steps useful for disassembling and replacing the fuel tank and ignition coil of the Keeway Cafe Racer 152 motorcycle. First of all, we put the motorcycle on the stand and start by removing the passenger and rider seats; then we unscrew the screws of the tank found on the top and bottom of it, disconnecting the fuel line and the electrical connector to remove it, as shown in the video. At this point, we disconnect the spark plug connector and then the ignition coil, replacing and reassembling everything!

Posted on 19 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Fuel Filter on the Keeway Cafe Racer 152
How to Install the Fuel Filter on the Keeway Cafe Racer 152
Cafe Racer 152 This guide provides instructions for installing the fuel filter on the Keeway Cafe Racer 152 in simple, quick steps. First, place your bike on the ce…
How to Remove the Seat from a Keeway Café Racer 152
How to Remove the Seat from a Keeway Café Racer 152
Cafe Racer 152 Start by removing the side plastic fairings that cover the bolts securing the seat of your Keeway Café Racer 152, using a socket key and a spanner wh…
How to replace the spark plug on a Keeway Cafe Racer 152?
How to replace the spark plug on a Keeway Cafe Racer 152?
Cafe Racer 152 Good morning, today's guide is focused on replacing the spark plug of our Keeway Cafe Racer 152. To start, we will need to carefully remove the side …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos