Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Soul
    4. : Manufacturer emblem

Kia Soul - Manufacturer emblem

Manufacturer Emblem Kia Soul (2008-2014 / mk 1)

Kia Soul (2008-2014 / MK 1)
Remove Front Emblem on Kia Soul
Want to replace the badge on the front bonnet? Here’s how to remove the badge from the bonnet of the Kia Soul. Get some plastic trim tools, then pry between …Read all…
Posted on 30 April 2026 by ScegliAuto
Kia Soul (2008-2014 / MK 1)
Replacing the Manufacturer's Emblem
If you wish to replace the manufacturer's emblem, proceed as follows. Using a plastic tool to avoid damaging the bodywork, place a cloth near the logo to be …Read all…
Posted on 10 February 2026 by ScegliAuto
Airbag (1) Speaker (2) Antenna (1) Car stereo (2) Battery (6) Transmission (1) Spark plugs (1) Glow plugs (1) Key (9) Checks and maintenance (4) Headlight (2) Fog lights (1) Air filter (2) Cabin air filter (4) Oil filter (1) Parking brake (1) Clutch (1) (1) Grille (1) Window switch (1) Accessory kit (3) Light bulb (1) Side marker bulb (1) Headlight bulb (4) Interior dome light bulb (2) License plate light (2) Trim cover (1) Engine oil (2) Clock (3) Door trim panel (3) Front bumper (2) Rear bumper (1) Brake pads (1) Shift knob (1) Power window switch (1) Radiator (1) Wheel (1) Fuse box (13) Seat (2) Side mirror (2) Warning light – error code (2) (2) Tire pressure warning light (3) Service warning light (18) Manufacturer emblem (2) Fuel cap (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos