Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Manufacturer's Emblem

Model: Kia Soul MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Manufacturer emblem

See other generations:
Video tutorial

If you wish to replace the manufacturer's emblem, proceed as follows. Using a plastic tool to avoid damaging the bodywork, place a cloth near the logo to be removed and lever between the logo and the bodywork, forcing it out in several places until it comes free.

Alternatively, use a nylon wire to remove the adhesive. Clean the bodywork thoroughly with a solvent to remove any traces of glue.

At this point, simply remove the protective film, position the emblem, and press it into place. Follow the same procedure for all other logos.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Remove Front Emblem on Kia Soul
Remove Front Emblem on Kia Soul
Kia Soul (2008-2014 / MK 1) Want to replace the badge on the front bonnet? Here’s how to remove the badge from the bonnet of the Kia Soul. Get some plastic trim tools, then pry …
Replacing Front Brake Pads on Kia Soul
Replacing Front Brake Pads on Kia Soul
Kia Soul (2008-2014 / MK 1) Replacing the front brake pads on a Kia Soul. Let's see how to disassemble the parts. Lift the car on a column lift to the desired height, remove the…
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Kia Soul (2008-2014 / MK 1) Replacing the interior light bulb is very simple but requires caution as you are dealing with snap-fit components. Start by prying with a suitable to…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos