Do it yourself
Frequently asked questions about cars and motorcycles

How to Calibrate the Steering Angle Sensor on the Kia Cee'd?

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

To calibrate the steering angle sensor on the Kia Cee'd, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard just below the steering column. Once the scanner is connected, select the specific car model and its corresponding version: then follow all the instructions shown in the tutorial to ensure the sensor is calibrated correctly.

After disconnecting the scanner, verify that the calibration has been successful.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Kia Cee D (2018-2024 / CD, MK 3) After a brief clarification that this video guide applies to multiple Kia vehicle models, including the Kia Cee'd, we will now describe the procedure…
Kia Cee D (2018-2024 / CD, MK 3) To reset the Service light on a Kia Cee'd, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press the men…
Kia Cee D (2006-2012 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the diesel filter of the Kia Cee D, in simple steps. Fi…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos