Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Monitoring System Light on a Kia Stonic

Model: Kia Stonic Ybcuv, MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

Video tutorial

Today, let's look at how to reset the Tyre Pressure Monitoring System (TPMS) light on a Kia Stonic; before performing the reset, ensure all four tyres are at the correct operating pressure. First, get in the vehicle and turn on the ignition; then press and hold the "set" button found on the dashboard panel until the light on the instrument cluster resets, as shown in the video.

At this point, start the engine and check that the TPMS light has been successfully reset.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Where is the tire pressure warning light reset button located in the Kia Stonic?
Where is the tire pressure warning light reset button located in the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) It is important to remember that resetting the tire pressure anomaly warning light in any car, including the Kia Stonic, should only be done after fi…
How to Reset the Tyre Pressure Warning Light on a Kia Stonic?
How to Reset the Tyre Pressure Warning Light on a Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) The tyre pressure warning light displayed on the instrument panel of the Kia Stonic can be reset by first inflating the tyres to the recommended pres…
How to Reset the Tyre Pressure Monitoring System on the Kia Stonic
How to Reset the Tyre Pressure Monitoring System on the Kia Stonic
Kia Stonic (2017-2026 / Ybcuv, MK 1) Here are the steps to reset the Tyre Pressure Monitoring System (TPMS) on the Kia Stonic (version with dual 12.3" display). First, adjust the tyre pr…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos