Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the KIA Picanto?

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear light bulbs in the KIA Picanto, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely.

Then, open the trunk door, locate the two bolts along the inner edge of the headlight in question and unscrew them using a simple Phillips screwdriver. Next, grab the headlight, pull it outwards, and separate it from the body of the car. At this point, all that's left to do is disconnect the power connector, replace the faulty element, and follow the reverse procedure.


Posted on 23 February 2025 by ScegliAuto


Related tutorials

How to Remove the Front Position Light Bulb of a Kia Picanto?
How to Remove the Front Position Light Bulb of a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) Good morning, today's objective is to remove the front position light bulb of your Kia Picanto. Start by lifting the front of the car with a jack. Th…
Where are the Fuses Located on the Kia Picanto?
Where are the Fuses Located on the Kia Picanto?
Kia Picanto (2004-2011 / MK 1, 2A) The fuses on the Kia Picanto are divided within the designated fuse boxes located inside the vehicle. In this model, there are two boxes: the first i…
How to Replace the Daytime Running Light Bulb on a Kia Picanto?
How to Replace the Daytime Running Light Bulb on a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To replace the daytime running light bulb on a Kia Picanto, you need to unscrew the screws that secure the inner cover of the wheel arch correspondin…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos