Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the 12v battery of the Kia E Niro

Model: Kia Niro SG2 - Years 2021-2026
Part: Battery

In today's article, we are going to see how to replace the 12v battery of the Kia E Niro. For this operation, you will need a 10mm wrench and socket and a 12mm wrench. First, you need to remove the bolt securing the negative connector, using a 10mm wrench. After disconnecting the negative connector, disconnect the positive connector using the 10mm wrench as well. Once both connectors are disconnected, remove the bolt securing the battery in the lower part using the 12mm wrench. At this point, you will be able to remove the battery and replace it. Reinsert the battery securing bolt, then connect the positive connector and then the negative one. The procedure will then be complete.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Battery of the Kia Niro
Guide to Replacing the Battery of the Kia Niro
Kia Niro (2016-2023 / MK 1) The main instructions today will show you how to remove and replace the 12V battery of the Kia Niro. First, locate the battery positioned in the boot…
How do you replace the battery of the Kia Niro?
Kia Niro (2016-2023 / MK 1) The 12V auxiliary battery of the Kia Niro is located on the right side of the trunk compartment: it will be possible to locate it by opening the tail…
How to replace the battery of the Kia Niro remote control
How to replace the battery of the Kia Niro remote control
Kia Niro (2016-2023 / MK 1) Today we will explain the steps to replace the battery of a Kia Niro remote control. The first step is to open the cover of the remote control by ins…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos