Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the service light on the Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Service warning light

In this article, we will see how to reset the service light of the Kia Sportage. To reset this light, first start the ignition without starting the engine, then press the menu button on the right side of the steering wheel as shown in the video tutorial, until you locate the service light. Once you have located the service light, press the ok button for about 6 seconds, now below the light the message "press ok to reset" will appear, so press the ok button to confirm the reset, once the procedure is complete restart the instrument panel. We recommend performing this operation only if the reset is not done at the workshop that performed the vehicle's service.

Posted on 18 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Kia Sportage (2016-2022 / QL, MK 4) To completely make the Service light disappear that is shown on the instrument panel of the Kia Sportage, you will need to activate the instrument pa…
Kia Sportage (2016-2022 / QL, MK 4) This guide provides instructions to reset the tyre pressure on a Kia Sportage. You will bring all four tyres to the correct operating pressure to res…
Kia Sportage (2010-2016 / SL, MK 3) Resetting the service light on a 2016 Kia Sportage is a straightforward task that takes just a few minutes. Start by turning on the instrument cluste…

Other guides you may be interested in

    Frequently Asked Questions

    • Sportage 2016-2022 - What does the engine oil warning light indicate on the Kia Sportage Mk4? Read answer
    • Sportage 2016-2022 - How to reset the Kia Sportage QL service light? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos