How to Reset the Service Light in a Kia Ceed

Model: Kia Cee D - Years 2006-2012
Part: Service warning light

To reset the service light in a Kia Ceed, insert the key and turn the ignition to the ON position without starting the engine. Use the control buttons on the steering wheel to scroll through the information displayed until you reach the maintenance section. When the service indication appears, press and hold the reset button for more than 5 seconds. The display will show the word "Reset". At this point, release the button and press it again for at least 1 second to confirm the reset of the maintenance interval. Finally, check that the new interval has been correctly stored.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Steering Wheel - Maintenance and repair on other vehicles

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!

by ScegliAuto

How to Reset the Service Light in a Kia Ceed

Related tutorials

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

More videos