Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Soul
  6. : Engine oil and oil filter replacement

Kia Soul - Video tutorial

Model: Kia Soul MK 1 - Years 2008-2014
Part: Engine oil
Operation: Engine oil and oil filter replacement

Raise the car on a lift and remove the stone guard: then intercept the oil sump drain plug (located behind the sump itself) and unscrew it, collecting the used oil in a special tray. Then proceed to replace the oil filter cartridge which is located right in front of the sump: unscrew it with a metal clamp wrench and screw the new one after having sprinkled the gasket with oil (simply tighten by hand) Once the drain is complete, screw the sump cap back on and fill the engine with new oil according to the quantities and SAE specifications indicated in the use and maintenance manual.


Posted on 15 July 2023 by ScegliAuto



Engine oil and filter replacement
Kia Soul (2008-2014 / MK 1) Find the original replacement filter, the various gaskets and the oil. Lift the machine with the appropriate jacks and secure it with suitable suppor
How to reset the service on the Kia Soul.
Kia Soul (2008-2014 / MK 1) If we want to replace the engine oil and oil filter on a car model, we must then proceed to complete the job by resetting the service light that appe
How to reset the service light of the Kia Soul
Kia Soul (2013-2018 / MK 2) After replacing the engine oil and oil filter, it will be necessary to reset the maintenance light; let's see how to reset the service light on the K

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos