Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light and Replace the Bulb on the Kia Sportage 4

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Tail light

In this video tutorial, you will see step-by-step instructions to remove the rear light and replace the bulbs on the fourth generation Kia Sportage. First, open the boot lid and remove the plastic cover next to the light; then unscrew the fixing screws located underneath, as illustrated in the video. At this point, pull the light outwards, disconnecting the electrical connector; if necessary, replace the bulbs found inside. Then apply the reverse procedure for reassembly!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight Bulb on a Kia Sportage
How to Remove the Rear Headlight Bulb on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before starting, open the tailgate of your Kia Sportage. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next,…
How to Replace the Front Headlamp Bulb on the Kia Sportage 4
How to Replace the Front Headlamp Bulb on the Kia Sportage 4
Kia Sportage (2016-2022 / QL, MK 4) To correctly replace the front headlamp bulb on your Kia Sportage fourth generation (2016-2022), carefully read the following guide and follow the de…
How to Replace the Rear Headlamp Bulb on a Kia Sportage?
How to Replace the Rear Headlamp Bulb on a Kia Sportage?
Kia Sportage (2010-2016 / SL, MK 3) To replace the rear headlamp bulb on a Kia Sportage, open the rear tailgate of the car to access the screws next to the headlamp. Once these two scre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos