Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on a Kia Sportage MK4

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Side marker bulb

In today's video, we will see the main steps to disassemble and replace the indicator bulb in the front headlamp of the fourth series Kia Sportage, in simple steps. First, open the bonnet of your car and locate the indicator bulb at the back of the lamp; remove the bulb holder by turning it counterclockwise and pull it out along with the bulb, as shown in the video. At this point, remove the old bulb and replace it with a new one of the correct type; then, simply reassemble everything by inserting and turning the bulb holder!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb of the Kia Sportage
How to Replace the Front Indicator Bulb of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) In this video tutorial, you will learn how to remove and replace the front indicator bulb of the Kia Sportage in simple and quick steps. First, open …
How to replace the front turn signal bulb of the Kia Sportage
How to replace the front turn signal bulb of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In the following guide aimed at all of you who own a third-generation Kia Sportage, we will explain the steps you need to take if you intend to repla…
Replacing the Dipped Beam Bulb on a Kia Sportage MK4
Replacing the Dipped Beam Bulb on a Kia Sportage MK4
Kia Sportage (2016-2022 / QL, MK 4) In today’s video, you will learn how to disassemble and replace the dipped beam bulb of the front headlight on the fourth generation Kia Sportage in …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos