Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Shock Absorbers

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Shocks

To change the shock absorbers, first raise the vehicle, always observing all safety regulations. Then, start by removing the wheels. After the wheels, disconnect the brake sensor fixed on both sides of the shock absorber mount. Next, undo the stabiliser bar. Now, unbolt the shock absorber from the wheel hub. Move on to the upper mount of the shock absorber located in the boot, covered by a cover that needs to be removed with a thin-bladed tool. Always pay close attention to the position of what you disassemble to avoid difficulties when reassembling or issues during vehicle use. Once the shock absorber assembly is removed from the wheel arch, compress the spring and then remove the actual shock absorber. Now, reposition the new one inside the spring and release the spring, ensuring everything is in its original and correct position. With the help of another person, insert the spring-shock absorber assembly under the wing and bolt the nuts in the boot. At this point, bolt the suspension to the wheel hub, also reattaching the brake sensor. Refit the stabiliser bar and finish by remounting the wheel. Car model: Kia Sportage Year: 2006.

Updated on 10 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Kia Sportage (2016-2022 / QL, MK 4) Today we will see the instructions that will allow us to lower the rear seats of the KIA Sportage, in simple and quick steps. First, we open the rear…
Kia Sportage (2010-2016 / SL, MK 3) In this video, we see how to change the rear shock absorbers of the 2015 Kia Sportage: we lift the car and remove the wheel, support the lower arm wi…
Kia Sportage (2004-2010 / MK 2, KM) Lift the vehicle on a hydraulic lift and remove the front wheel; then disconnect the wear sensor support brackets and the brake fluid pipe from the s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos