Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How to replace the cabin filter in the KIA Ceed?

Kia Cee D - Video tutorial

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Cabin air filter
Operation: How to replace the cabin filter in the KIA Ceed?

In this tutorial we can see how to replace the cabin filter in the KIA Ceed, an extremely simple and economical operation. We start by going to the passenger seat, then we open the glove compartment, remove the two side blocks by turning them counterclockwise and unhook the end-of-stroke shock absorber on the left side. Once the drawer has been placed on the ground, we release the left clip of the long rectangular door, extract the old filter and clean the inside of the housing from any residue. Finally, we insert the spare part, taking care to respect its direction.


Posted on 21 September 2022 by ScegliAuto



How to reset the service light on the Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the se
How to replace the pollen filter on a Kia CEED.
Kia Cee D (2006-2012 / MK 1) In this video tutorial, we can see how to replace the pollen filter on a Kia CEED by following a few simple steps: the first thing to do is to purcha
How do you replace the battery in the Kia Ceed?
Kia Cee D (2012-2018 / JD, MK 2) To be able to replace the battery of the Kia Ceed you have to go and open the hood, so that you have access to the components inside the engine compa

    Frequently Asked Questions

    • Cee D 2006-2012 - Where is the cabin air filter of the Kia Cee'd? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos