Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the KIA Forte?

Model: Kia Forte K3 MK  3, BD - Years 2018-2025
Part: Cabin air filter

As you can see in this tutorial, replacing the cabin air filter in the KIA Forte is an extremely simple and quick task. First, go to the passenger seat, then open the glove compartment, empty it, and unclip the two side locks by turning them slightly counterclockwise. Once done, locate the long rectangular door, open it by unlocking the two clips, and remove the old filter. At this point, clean the inside of the housing from any debris, insert the new filter in the correct direction, and reassemble everything.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the KIA Forte?
How to Replace the Cabin Air Filter in the KIA Forte?
Kia Forte K3 (2018-2025 / MK  3, BD) .. In this tutorial, see how to replace the cabin air filter in the KIA Forte, a very simple and quick task. First, position yourself.. …
How to Replace the Cabin Air Filter in a KIA Forte?
How to Replace the Cabin Air Filter in a KIA Forte?
Kia Forte K3 (2018-2025 / MK  3, BD) In this tutorial, you will see how to replace the cabin air filter in a KIA Forte, a very simple and quick operation. First, go to the passenger side…
How to Replace the Cabin Air Filter in a 2011 Kia Forte
How to Replace the Cabin Air Filter in a 2011 Kia Forte
Kia Forte K3 (2008-2013 / TD, MK 1) To replace the cabin air filter in your 2011 Kia Forte, follow these simple steps. Fortunately, the entire procedure takes only a few seconds to comp…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos