Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the gearbox oil on the Kia Cadenza?

Model: Kia Cadenza VG - Years 2010-2016
Part: Transmission fluid

In order to replace the gearbox oil on the Kia Cadenza, you need to access the components located in the lower part of the car: in the engine compartment, it will be possible to find the oil drain plug contained inside the gearbox exchange. When the cap has been unscrewed, it will be possible to collect the used oil in a suitably positioned container; once all the oil has escaped, it will be possible to open the bonnet and top up from the special breather. This will be located in the part of the engine compartment between the engine and the battery.

Posted on 8 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change engine oil and oil filter on Kia Cadenza
How to change engine oil and oil filter on Kia Cadenza
Kia Cadenza (2017-2022 / YG) Let's see today the procedure necessary to be able to carry out the ordinary maintenance coupon, replacing the engine oil and the oil filter, of the …
How to change the engine oil of the Kia Cadenza?
How to change the engine oil of the Kia Cadenza?
Kia Cadenza (2017-2022 / YG) In order to change the engine oil of the Kia Cadenza, you need to access the lower part of the car, identifying the oil drain plug that must be opene…
How to change oil and filter in the Kia Cadenza?
How to change oil and filter in the Kia Cadenza?
Kia Cadenza (2017-2022 / YG) We raise the car on the stands and unscrew the protective panel of the oil pan, then proceed to unscrew the locking pin and let the old oil flow into…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos