Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Kia Cadenza

Model: Kia Cadenza YG - Years: 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

Today, let's look at the procedure to perform routine maintenance by replacing the engine oil and oil filter of the Kia Cadenza. First, lift the vehicle and start draining the engine oil by unscrewing the drain plug located on the oil pan; allow the oil to drain into a container for about ten minutes, as shown in the video.

Next, unscrew the oil filter cartridge, which is located on the right side of the engine compartment; make sure to properly install the new gasket. Finally, unscrew the fill cap and top off the oil!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Kia Cadenza?
How to Change the Engine Oil in the Kia Cadenza?
Kia Cadenza (2017-2022 / YG) To change the engine oil in the Kia Cadenza, access the underside of the vehicle and locate the oil drain plug, which needs to be opened: the used oi…
How to Change Oil and Filter in a Kia Cadenza?
How to Change Oil and Filter in a Kia Cadenza?
Kia Cadenza (2017-2022 / YG) Lift the car on jack stands and remove the protective panel from the oil pan, then proceed to unscrew the drain plug and let the old oil flow into a …
What is the Fuse Box Diagram for the KIA Cadenza?
What is the Fuse Box Diagram for the KIA Cadenza?
Kia Cadenza (2010-2016 / VG) In this video, we can see where the fuse boxes are located in the KIA Cadenza and their respective diagrams, useful in case we need to check the fuse…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos