Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Kia Mohave Borrego Radio

Model: Kia Mohave Borrego HM - Years 2008-2019
Part: Car stereo

Discover the procedure and main steps to remove and replace the factory radio of the Kia Mohave Borrego. First, get inside the vehicle and start by removing the plastic covers on the sides and underneath the radio; then, unscrew the mounting screws located on the sides of the radio, as shown in the video. At this point, disconnect the electrical connectors found behind the radio; then install the new one, compatible with your vehicle, making the electrical connection!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
How to Replace the Alternator on the Kia Mohave Borrego V6
How to Replace the Alternator on the Kia Mohave Borrego V6
Kia Mohave Borrego (2008-2019 / HM) Today, you will learn how to remove and replace the alternator on the Kia Mohave Borrego V6 by following these simple instructions. First, open the h…
How to Remove the Center Multimedia Player from a Kia Mohave Borrego
How to Remove the Center Multimedia Player from a Kia Mohave Borrego
Kia Mohave Borrego (2008-2019 / HM) If you need to perform some work on your Kia Mohave Borrego and need to remove the center multimedia player, you can do so easily by following the in…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos