Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Multimedia Player from a Kia Mohave Borrego

Model: Kia Mohave Borrego HM - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

Video tutorial

If you need to perform some work on your Kia Mohave Borrego and need to remove the center multimedia player, you can do so easily by following the instructions in this video. The two side pillars, from which the operation begins, are snap-fit. The YouTuber had already removed them, but using a plastic pry tool, they can come off easily.

Next, remove the upper panel with the ventilation grilles, of course, after disconnecting the electrical connector. At this point, only 4 screws hold the multimedia unit in place: just unscrew them, and it will come out. Disconnect the rear plugs, and the job is done.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
How to Replace the Alternator on the Kia Mohave Borrego V6
How to Replace the Alternator on the Kia Mohave Borrego V6
Kia Mohave Borrego (2008-2019 / HM) Today, you will learn how to remove and replace the alternator on the Kia Mohave Borrego V6 by following these simple instructions. First, open the h…
Guide to Removing the Kia Mohave Borrego Radio
Guide to Removing the Kia Mohave Borrego Radio
Kia Mohave Borrego (2008-2019 / HM) Discover the procedure and main steps to remove and replace the factory radio of the Kia Mohave Borrego. First, get inside the vehicle and start by r…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos