Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Overview and Installation of the Load Net

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Accessory kit

See other generations:
Video tutorial

Open the boot and prepare the load net. The net has two elastic straps at the top corners and two carabiners at the bottom corners. To install the load net, there are four elements on the side walls immediately after the boot lid that allow you to hook the net at its corners.

At the top, there is the hook for the elastic and at the bottom, the one for the plastic carabiner. Hook the net at all four corners, stretching it out in front of the rear opening.

The car shown during this maintenance operation is a Kia Sorento.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Side Step Installation Instructions
Side Step Installation Instructions
Kia Sorento (2009-2014 / MK 2) Remove the clips along the edge of the wheel arch to take off the splash guard. Next, remove the side skirt (screws and clips) and also take out the …
How to Remove the Door Handle on a Kia Sorento
How to Remove the Door Handle on a Kia Sorento
Kia Sorento (2002-2009 / MK 1) Learn how to remove and install the external handle located above the door on a Kia Sorento. Unscrew the securing screws (side panel) with the approp…
How to Reset the Service Light on a 2023 Kia Sorento
How to Reset the Service Light on a 2023 Kia Sorento
Kia Sorento (2020-2026 / MK 4) Resetting the service light on the 2023 Kia Sorento is a straightforward task you can do yourself. First, turn on the instrument cluster. Second, pre…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos