Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the KIA Sportage?

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Service warning light

Resetting the service light on the KIA Sportage, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure all scheduled maintenance tasks have been completed. Start by entering the cabin, then turn on the instrument cluster and, using the indicated button, navigate to the vehicle information menu represented by a spanner icon. Scroll through the various screens until you reach the service section and perform the reset by holding down the "OK" button. Finally, restart the ignition.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sportage (2021-2026 / MK 5, NQ5) In this tutorial, see how to reset the service in the KIA Sportage, a very simple and quick operation to perform only after completing all scheduled …
Kia Sportage (2021-2026 / MK 5, NQ5) In this tutorial, you will see how to reset the service light on a KIA Sportage, a very simple and quick operation, to be performed only after comple…
Kia Sportage (2016-2022 / QL, MK 4) This tutorial explains how to reset the service light in the KIA Sportage, a very simple and quick operation to perform only after completing all sch…

    Frequently Asked Questions

    • Sportage 2016-2022 - What does the engine oil warning light indicate on the Kia Sportage Mk4? Read answer
    • Sportage 2016-2022 - How to reset the Kia Sportage QL service light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos