Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tyre pressure warning light on the Kia Stonic?

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Kia Stonic, first inflate the tyres to the correct pressure: this value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, enter the cabin and turn on the instrument cluster. Then, press and hold the button with the low pressure icon located on the central dashboard panel. This will reset the warning light, and the instrument cluster can be turned off again.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Stonic (2017-2026 / Ybcuv, MK 1) To manually reset the tyre pressure warning light on your 2020 Kia Stonic, follow these simple steps. First, get into the driver's seat and turn on t…
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the tire pressure warning light of the Kia Stonic, you need to inflate the tires to the recommended pressure value: this value is indicated …
Kia Stonic (2017-2026 / Ybcuv, MK 1) Today, you will learn how to reset the tyre pressure light on a Kia Stonic. Before performing the reset operation, ensure that all issues related to …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos