Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light of the Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Tail light

Open and lift the boot lid to access the screws along the edge of the boot lid, specifically at the same height as the light. The task is to unscrew the screws to release the light. Once unscrewed, you can pull the light from its position and disconnect the connector at the back. Now you can work more comfortably on the light and carry out the necessary replacements. Retrace the described steps for reassembling each part.

Updated on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Kia Picanto (2011-2018 / TA, MK 2) Learn how to replace the rear light of your Kia Picanto in this video along with the bulbs. Open the boot lid, and unscrew (using a socket or screwdr…
Kia Picanto (2004-2011 / 2A, MK 1) Replacing the rear headlight bulb of the Kia Picanto is a very simple operation. We start by opening the rear hood of the car and removing the two To…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos