Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of Your Kia Picanto

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Learn how to replace the rear light of your Kia Picanto in this video along with the bulbs. Open the boot lid, and unscrew (using a socket or screwdriver) the securing bolts of the rear light (bolts next to the light).

Once the light is free from any constraints, detach it from the bodywork and disconnect the light power connectors. Replace the damaged bulbs with new ones (same voltage and size as the original).

Finally, refit the new light and reverse the assembly of the other parts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light of the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Open and lift the boot lid to access the screws along the edge of the boot lid, specifically at the same height as the light. The task is to unscrew …
How to reset the TPMS light on the 2015 Kia Picanto
How to reset the TPMS light on the 2015 Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) If the orange tyre light (TPMS) illuminates on the instrument cluster of your second-generation Kia Picanto (2015), it means there is a puncture or a…
Where to Find the OBD2 Port on a Kia Picanto 2
Where to Find the OBD2 Port on a Kia Picanto 2
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos