Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on a Kia Rio MK4

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Service warning light

In this video we can see how to reset the maintenance light on a Kia Rio MK4 (also known as YB): we must make sure all doors, hood and trunk are closed, then turn on the ignition and press the "ok" button, which is the one for resetting, for at least five seconds, then we can release it. Turn off the ignition, wait a moment, and then turn it back on: at this point the light should have been reset. If not, it is recommended to repeat the procedure from the beginning, and carefully check that all doors are properly closed.

Posted on 9 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Kia Rio?
How to Reset the Tyre Pressure Light on the Kia Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) To reset the tyre pressure light on the Kia Rio, first inflate the car tyres to the correct inflation pressure: this value is indicated on the sticke…
How to reset the service light in the 2019 Kia Rio?
How to reset the service light in the 2019 Kia Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) Discover, through the video guide provided, how to clear the service light and related message on the onboard computer in the 2019 Kia Rio. This proc…
How to Reset the Service Light on a Kia Rio 4
Kia Rio (2016-2023 / YB, MK 4, SC) If you do not know how to correctly perform the manual reset of the service light on your Kia Rio fourth series, do not worry as the following guide …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos