Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Kia Rio?

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Tire pressure warning light

To reset the tyre pressure light on the Kia Rio, first inflate the car tyres to the correct inflation pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are correctly inflated, enter the cabin and turn on the instrument panel; press and hold the button with the low pressure icon located to the left of the steering wheel. After a few seconds, you will notice that the light resets.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Kia Rio
Resetting the Tyre Pressure Warning Light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) In this guide, learn how to reset the tyre pressure warning light on the Kia Rio. Before performing the reset operation, ensure that all four tyres a…
How do you reset the tire pressure light of the Kia Rio?
How do you reset the tire pressure light of the Kia Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) The tire pressure sensor shown on the instrument panel of the Kia Rio can be reset by inflating the tires until they reach the recommended pressure v…
How to reset the tire pressure warning light on the Kia RIO
How to reset the tire pressure warning light on the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos