Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Kia Rio

Model: Kia Rio MK 4, SC, YB - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure and turn off the tyre warning light on a Kia Rio, switch on the ignition without starting the engine. In the video, the light has already been reset, but if you see the light on, first check the tyre pressures.

Once you confirm that the pressures are in line with the manufacturer's specifications, get inside the car, switch on the ignition again, and press and hold the button on the bottom left of the controls on the left side of the steering wheel until the light stops flashing and turns off. Finally, switch off the ignition and the operation is complete.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Resetting the TPMS Light on Kia Rio
Resetting the TPMS Light on Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Thanks to this brief video tutorial, you can see how to reset the TPMS light, which relates to tyre pressure, on a Kia Rio, third generation model pr…
How to reset the tyre pressure warning light on a Kia Rio?
How to reset the tyre pressure warning light on a Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure warning light on a Kia Rio, inflate the tyres to the recommended pressure value: these values are listed on the sticker at…
How to Reset the Tyre Pressure Light on the Kia Rio?
How to Reset the Tyre Pressure Light on the Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure light on the Kia Rio, first inflate the car tyres to the correct inflation pressure: this value is indicated on the sticke…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos