Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Stuck Boot Lid on the KIA Niro?

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

On the KIA Niro, the boot lid may become stuck, for example, due to a problem with the control button or the lock actuator. In these cases, you can perform an emergency opening by following the simple procedure shown in this tutorial.

First, unlock the locks using the appropriate button on the remote, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go to the boot, locate the slot near the lock, and manually operate it using the metal key. The boot lid will now be free to open.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Kia Niro (2016-2023 / MK 1) In this guide we will see the instructions that will allow us to open the rear tailgate of the Kia Niro trunk, in simple steps. The rear tailgate of …
Kia Niro (2021-2026 / SG2) On the KIA Niro, the fuel flap may get stuck, for example, due to a problem with the control button or the lock actuator. In this case, you can still…
Kia Niro (2016-2023 / MK 1) The 12V auxiliary battery of the Kia Niro is located on the right side of the boot: you can find it by opening the tailgate and removing the trim in …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos