|
Do it yourself
| |||
| ||||
How to reset the tire pressure on the Kia Picanto
Model: Kia Picanto
MK 2, TA
- Years 2011-2018
In this video we can see how to reset the tire pressure warning light on the Kia Picanto MK2: it is a very simple operation, because on this type of vehicle there is a dedicated button specifically for this service located at the bottom of the dashboard, to the left of the steering wheel. It is a group of four buttons, where the one we are interested in is the first one on the right, which shows a section of a tire with an exclamation point in the center, the same symbol that we find on the instrument panel. Before resetting the warning light, we will have checked the tire pressure, comparing it with the pressure recommended by the manufacturer, which can be found on the sticker located inside the driver's side door pillar.
Posted on 16 May 2024 by ScegliAuto
Video tutorial
Related tutorials
Kia Picanto
(2011-2018 /
MK 2, TA)
Today we will explain how to independently access the menu of the car and view the menu related to the TPMS warning light, related to tire pressure o…
Kia Picanto
(2011-2018 /
MK 2, TA)
When you are on board your Kia Picanto and when you turn on the instrument panel you see a steady yellow light with an exclamation point drawn in the…
Kia Picanto
(2011-2018 /
MK 2, TA)
In order to reset the tire pressure warning light on the Kia Picanto you need to inflate all the tires, bringing them to the correct inflation pressu…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Rear Light and Bulbs on a Ford Focus Year 2000
To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
