Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Engine oil

To replace the motor oil in your KTM Duke 390, start by making sure the engine is cold. Then, place the motorcycle on a flat and stable surface. Remove the oil cap on the right side of the engine and place a container under the oil drain cap. Remove the drain cap and let the used oil drain completely. Check and replace any damaged gaskets. Tighten the drain cap securely. Fill the engine with the recommended motor oil up to the correct level. Screw the oil cap back on and start the engine to allow the oil to circulate. Turn off the engine and check the oil level using the dipstick. Add oil if necessary and close the oil cap. Make sure to dispose of the used oil safely and correctly.

Posted on 28 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…
How to replace the engine oil in the KTM Duke 390?
How to replace the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we can see how to replace the motor oil in the KTM Duke 390, an extremely simple and fast operation. First of all, make sure that t…
How to replace the engine oil in the KTM Duke 390?
Duke 390 Replacing the motor oil in the KTM Duke 390, as we can see in this tutorial, is an extremely simple and quick operation. First of all, we wait for th…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos