Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the KTM SX 125?

Model: Ktm Sx 125
Part: Engine oil

This video is currently unavailable

In order to replace the motor oil of the KTM SX 125, you need to loosen the drain plug of the oil sump located in the central lower part of the vehicle: once the plug has been removed, you can collect the used oil in a properly positioned container.

The oil filter located in the central lower part of the bike can now be extracted from its housing so that it can be replaced with a new spare part.

You can top up by adding the necessary amount of oil from the breather on the right side of the vehicle.


Posted on 25 January 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a KTM SX 125
How to Change the Engine Oil on a KTM SX 125
Sx 125 In this video, learn how to perform the routine maintenance service for the oil change on the KTM SX 125 enduro bike, as well as on the TM 125. First…
How to Change the Gear Oil on a KTM SX 125
How to Change the Gear Oil on a KTM SX 125
Sx 125 In today's video, learn how to change the gear oil on the KTM SX 125 enduro bike, as well as the 50 model. First, place your bike on a stand and star…
How to Replace the Transmission Oil of the KTM SX 125
How to Replace the Transmission Oil of the KTM SX 125
Sx 125 This guide shows you how to perform routine maintenance by replacing the transmission oil on the KTM SX 125 enduro bike. First, place the bike on a s…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos