Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the KTM RC 390?

Model: Ktm Rc 390
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the KTM RC 390, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then place a container under the motorcycle, locate the bolt of the first drainage hole and unscrew it with an 18mm socket wrench.

Then remove the secondary filter, clean it from any dirt residue and continue by unscrewing the second bolt with a 13mm wrench. At this point, all that remains is to open the filter cap with an 8mm wrench, insert the replacement, reassemble everything and pour the new oil through the appropriate upper hole.


Posted on 21 March 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a KTM RC 390?
How to Change the Engine Oil in a KTM RC 390?
Rc 390 In this tutorial, you will see how to change the engine oil in a KTM RC 390, a very simple and quick operation to be performed every 12 months. First…
How to Change the Engine Oil in a KTM RC 390?
How to Change the Engine Oil in a KTM RC 390?
Rc 390 As seen in this tutorial, changing the engine oil in a KTM RC 390 is an extremely simple and quick operation. First, wait for the engine to cool down…
How to Change the Engine Oil in the KTM RC 390
How to Change the Engine Oil in the KTM RC 390
Rc 390 In this tutorial, you will see how to change the engine oil in the KTM RC 390, a very simple and quick operation. First, wait until the engine is coo…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos