Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Exc 150

How do you replace the rear brake pads of the KTM EXC 150?

Model: Ktm Exc 150
Part: Brake pads

Video tutorial

In order to replace the rear brake pads of the KTM EXC 150, you will need to loosen the screws that secure the brake caliper to the disc, so that it can be detached after removal. Once the caliper has been detached, you can proceed by removing the pin that holds the pads inside the caliper in order to replace them with new replacement pieces.

After the new pads have been inserted, you can secure the caliper to the disc with the appropriate screws, making sure that everything works correctly.


Posted on 31 March 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a KTM EXC-300?
How to Replace the Rear Brake Pads on a KTM EXC-300?
Exc 300 To replace the rear brake pads on a KTM EXC-300, remove the retaining ring that secures the pin at the top of the caliper. This will allow the pin to…
How to Replace the Rear Brake Pads on the KTM EXC 250
How to Replace the Rear Brake Pads on the KTM EXC 250
Exc 250 This guide provides instructions to remove and replace the rear brake pads on the KTM EXC 250 enduro motorcycle, as well as the EXC 300 and XC models…
How to replace the front brake pads on the KTM EXC 250?
How to replace the front brake pads on the KTM EXC 250?
Exc 250 To replace the front brake pads on the KTM EXC 250, loosen the bolts that secure the brake caliper to the corresponding disc: once the securing bolts…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos