Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the KTM SXF 450?

Model: Ktm Sxf 450
Part: Engine oil

This video is currently unavailable

It will be possible to replace the engine oil in the KTM SXF 450 system by loosening the drain plug located at the bottom of the motorcycle, so that all the used oil can be collected in a properly positioned container. Once the oil has completely drained out, you can loosen the two screws that secure the oil filter in its housing, on the left side of the motorcycle.

After replacing the filter, you can pour in the new oil through the designated refill hole located on the left side of the vehicle's crankcase.


Posted on 2 May 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the KTM SXF 450
How to Change the Engine Oil of the KTM SXF 450
Sxf 450 To change the engine oil of the KTM SXF 450, loosen the drain plug located at the bottom of the bike to collect all the used oil in a suitably positi…
How to Service (Oil Change and Oil Filter) the KTM SXF 450
How to Service (Oil Change and Oil Filter) the KTM SXF 450
Sxf 450 This guide shows you how to perform the routine maintenance service by changing the engine oil and oil filter on the KTM SXF 450, following these sim…
How to Replace the Coolant on the KTM SXF 450
How to Replace the Coolant on the KTM SXF 450
Sxf 450 In today's tutorial video, follow the main steps to replace the coolant on the KTM SXF 450 with these simple instructions. First, drain the old coola…

How to Replace the Front Brake Pads of the Yamaha Tmax 530

This guide provides instructions on how to remove and replace the front brake pads of the Yamaha Tmax 530. First, place your motorcycle on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc. Then, use pliers to remove the front brake pads, as shown in the video. Clean the caliper from any residual dirt and apply pressure to the piston. Install the new high-quality brake pads, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos