Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Rc 125
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the KTM RC 125, a very simple and quick operation. First of all, we wait for the engine to be sufficiently cold, then we remove the lower fairing and place a container underneath the motorcycle. We then locate the drain plug, unscrew it using a socket wrench and continue by opening the filter cap. At this point, all that remains is to wait for all the oil to drain out of the system, insert the replacement filter, reassemble everything and pour in the new oil through the appropriate hole.

Posted on 22 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a KTM RC 125?
How to Change the Engine Oil on a KTM RC 125?
Rc 125 In this tutorial, see how to change the engine oil on a KTM RC 125, a very simple and quick operation to perform every 12 months. First, wait until t…
How to replace the engine oil in the KTM RC 125?
How to replace the engine oil in the KTM RC 125?
Rc 125 Replacing the motor oil in the KTM RC 125, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that t…
How to Change the Engine Oil in a KTM RC 125?
How to Change the Engine Oil in a KTM RC 125?
Rc 125 In this tutorial, we will see how to change the engine oil in a KTM RC 125, a very simple and quick operation to be performed every 12 months. First,…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos