Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a KTM RC 125?

Model: Ktm Rc 125
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil on a KTM RC 125, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container beneath the bike and, by unscrewing the indicated bolts, remove the lower fairing.

Next, locate the drain bolt, unscrew it with a socket spanner, and allow all the oil in the system to drain out. At this point, open the filter housing, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to replace the motor oil in the KTM RC 125?
How to replace the motor oil in the KTM RC 125?
Rc 125 In this tutorial we can see how to replace the engine oil in the KTM RC 125, a very simple and quick operation. First of all, we wait for the engine …
How to replace the engine oil in the KTM RC 125?
How to replace the engine oil in the KTM RC 125?
Rc 125 Replacing the motor oil in the KTM RC 125, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that t…
How to Change the Engine Oil in a KTM RC 125?
How to Change the Engine Oil in a KTM RC 125?
Rc 125 In this tutorial, we will see how to change the engine oil in a KTM RC 125, a very simple and quick operation to be performed every 12 months. First,…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos