Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 690
Part: Engine oil

To change the motor oil on a KTM Duke 690, start by lifting the bike and making sure it is stable. Place a container under the engine to collect the old oil. Remove the oil drain plug located at the bottom of the engine and let the old oil drain completely. Once the drainage is complete, replace the drain plug and tighten it securely. Then, through the oil filler opening, slowly pour the new motor oil through the filling tube, making sure to use the type and quantity specified in the owner's manual. After completing the filling, start the engine and let it run for a few minutes to allow the oil to distribute evenly and check for any leaks. Finally, check the oil level and add more if necessary.

Posted on 3 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Changing Engine Oil and Oil Filter on KTM Duke 690
Changing Engine Oil and Oil Filter on KTM Duke 690
Duke 690 In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…
How to Perform a Service on KTM Duke 690
How to Perform a Service on KTM Duke 690
Duke 690 In this video, you will see how to perform a routine maintenance service by changing the oil and oil filter on a KTM Duke 690. First, warm up the eng…
How to Change the Engine Oil in the KTM Duke 690?
Duke 690 In this tutorial, see how to change the engine oil in the KTM Duke 690, a very simple and quick operation to perform every 12 months. First, ensure t…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos