|
Do it yourself
| |||
| ||||
Model: Ktm Duke 690
In this tutorial, see how to change the engine oil in the KTM Duke 690, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then position a container underneath. Locate the drain plug and loosen it with a socket spanner. Next, remove the secondary plug, clean it of any dirt, and set it aside. At this point, open the main filter housing, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.
Updated on 2 September 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Duke 690
In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…
Duke 690
In this video, you will see how to perform a routine maintenance service by changing the oil and oil filter on a KTM Duke 690. First, warm up the eng…
Duke 690
To ensure that the oil change of the KTM Duke 690 takes place, you will need to unscrew the drain plug of the oil pan located in the central lower pa…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
