Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake discs of the KTM 1290 Super Duke GT

Model: Ktm 1290 Super Duke Gt
Part: Brake rotors

Video tutorial

Today's steps will show us how to disassemble and replace the front brake discs of the KTM 1290 Super Duke GT motorcycle, also replacing the brake pads. First, we lift the front wheel off the ground by securing the stand, then proceed with disassembling the wheel; to do this, we disconnect both brake calipers and unscrew the central wheel bolt, as shown in the video.

At this point, we unscrew the bolts of the front brake disc, remove it and replace it with the new original one; we also replace the other disc and brake pads, then reassemble the braking system and finally the wheel!


Posted on 12 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service on a KTM 1290 Super Duke GT?
How to Reset the Service on a KTM 1290 Super Duke GT?
1290 Super Duke Gt In this tutorial, you will see how to reset the service on a KTM 1290 Super Duke GT, a very simple and quick operation, to be done only after complet…
How to Replace the Air Filter of the KTM 1290 Super Duke?
How to Replace the Air Filter of the KTM 1290 Super Duke?
1290 Super Duke Gt You can replace the air filter of the KTM 1290 Super Duke by loosening the screws that secure the seat to its housing. Once the seat is removed, you …
How to change the brake pads on the KTM 1290 Superduke
How to change the brake pads on the KTM 1290 Superduke
1290 Super Duke Gt In this video, we will see how to change the brake pads on a KTM 1290 Superduke, which we will place on the center stand. Using a torx key, we unscre…

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos