Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the brake pads on the KTM 1290 Superduke

Model: Ktm 1290 Super Duke Gt
Part: Brake pads

Video tutorial

In this video, we will see how to change the brake pads on a KTM 1290 Superduke, which we will place on the center stand. Using a torx key, we unscrew the only two bolts holding the Brembo caliper.

We clean the caliper well with a specific product, and in this way the worn pads will come off easily, because there are no screws or any other constraints, they simply slide out. We can find these same pads on eBay with the code 273503997459 at a price of 72.90 euros, for the four pads with free delivery.

We reposition the pads inside the caliper, verify the correct position from the inside and put the caliper back in place, inserting the bolts at 40 Nm. Repeat on the other side.


Posted on 10 July 2025 by ScegliAuto


Related tutorials

How to replace the front brake discs of the KTM 1290 Super Duke GT
How to replace the front brake discs of the KTM 1290 Super Duke GT
1290 Super Duke Gt Today's steps will show us how to disassemble and replace the front brake discs of the KTM 1290 Super Duke GT motorcycle, also replacing the brake pa…
How to Reset the Service on a KTM 1290 Super Duke GT?
How to Reset the Service on a KTM 1290 Super Duke GT?
1290 Super Duke Gt In this tutorial, you will see how to reset the service on a KTM 1290 Super Duke GT, a very simple and quick operation, to be done only after complet…
How to Replace the Air Filter of the KTM 1290 Super Duke?
How to Replace the Air Filter of the KTM 1290 Super Duke?
1290 Super Duke Gt You can replace the air filter of the KTM 1290 Super Duke by loosening the screws that secure the seat to its housing. Once the seat is removed, you …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos