Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the KTM 1290 Super Duke?

Model: Ktm 1290 Super Duke Gt
Part: Air filter

Video tutorial

You can replace the air filter of the KTM 1290 Super Duke by loosening the screws that secure the seat to its housing. Once the seat is removed, you can detach it and locate the screws that secure the tank.

After removing these screws, proceed to disconnect the underlying connector and detach the fuel lines; at this point, you will be able to locate the filter box underneath. This should be opened to remove the air filter from its seat, insert the new one, and reassemble all removed components.


Posted on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a KTM 1290 Super Duke GT?
How to Reset the Service on a KTM 1290 Super Duke GT?
1290 Super Duke Gt In this tutorial, you will see how to reset the service on a KTM 1290 Super Duke GT, a very simple and quick operation, to be done only after complet…
How to replace the front brake discs of the KTM 1290 Super Duke GT
How to replace the front brake discs of the KTM 1290 Super Duke GT
1290 Super Duke Gt Today's steps will show us how to disassemble and replace the front brake discs of the KTM 1290 Super Duke GT motorcycle, also replacing the brake pa…
How to change the brake pads on the KTM 1290 Superduke
How to change the brake pads on the KTM 1290 Superduke
1290 Super Duke Gt In this video, we will see how to change the brake pads on a KTM 1290 Superduke, which we will place on the center stand. Using a torx key, we unscre…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos