Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the service on a KTM 1290 Super Duke GT, a very simple and quick operation, to be done only after completing the required scheduled maintenance work. Start by inserting the key and turning on the instrument cluster. Then, scroll through the screens upwards until you reach the settings menu. Next, press and hold both the up arrow and down arrow buttons, adjust the interval as needed, and save the setting using the left arrow. To verify that the reset has been successful, you can restart the instrument cluster.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the KTM 1290 Super Duke?
How to Replace the Air Filter of the KTM 1290 Super Duke?
1290 Super Duke Gt You can replace the air filter of the KTM 1290 Super Duke by loosening the screws that secure the seat to its housing. Once the seat is removed, you …
How to replace the front brake discs of the KTM 1290 Super Duke GT
How to replace the front brake discs of the KTM 1290 Super Duke GT
1290 Super Duke Gt Today's steps will show us how to disassemble and replace the front brake discs of the KTM 1290 Super Duke GT motorcycle, also replacing the brake pa…
How to change the brake pads on the KTM 1290 Superduke
How to change the brake pads on the KTM 1290 Superduke
1290 Super Duke Gt In this video, we will see how to change the brake pads on a KTM 1290 Superduke, which we will place on the center stand. Using a torx key, we unscre…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos