Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the rear turn signal bulb of the KTM 1190 Adventure, you need to loosen the screw located on the left side of the corresponding rear headlight. Once this screw is loosened, you can fully open the headlight assembly so that you can remove the bulb inside, disconnecting it from the connector. This way, you can insert the new bulb into the headlight, connecting it to the connector and then closing the headlight. This way, you can verify that everything is working correctly.

Posted on 20 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the KTM 1190 Adventure?
How to reset the service on the KTM 1190 Adventure?
1190 Adventure In this tutorial we can see how to reset the service on the KTM 1190 Adventure, an extremely simple and quick operation, to be carried out only once …
How do you replace the rear shock absorber of the KTM 1190 Adventure R?
How do you replace the rear shock absorber of the KTM 1190 Adventure R?
1190 Adventure In order to replace the rear shock absorber of the KTM 1190 Adventure R, you need to loosen the screws that fix it to its housing: this piece will be…
How to replace the headlight bulb of the KTM 1190 Adventure
How to replace the headlight bulb of the KTM 1190 Adventure
1190 Adventure Today we will see the steps that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the KTM 1190 Adve…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos