Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we see how to reset the service warning light on a KTM 1290. We turn on the ignition and hold down the directional buttons to access the settings, and look for the maintenance option: when we are there, we must press the center button and the "back" button simultaneously. If we do not do it at the same time, the system will not work. We remind you that the service intervals for this model must be done every 5,000 miles, which corresponds to 8,000 kilometers. After performing the reset operation, it is important to exit the menu and turn off the motorcycle. If the operation fails, it is possible to repeat it a second time.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a KTM 1290R
How to Reset the Service on a KTM 1290R
1290 Adventure R In this video, see how to reset the service on a KTM 1290R: it is really very simple. Access the menu by clicking the "set" button located on the lef…
Resetting the service light of the KTM 1290 Adventure
Resetting the service light of the KTM 1290 Adventure
1290 Adventure R After changing the oil and the corresponding filter on the KTM 1290 Adventure, we reset the system that warns us with a message on the left display a…
How to adjust the time on the KTM 1290 Adventure R?
How to adjust the time on the KTM 1290 Adventure R?
1290 Adventure R In this tutorial, we can see how to adjust the time on the KTM 1290 Adventure R, an extremely simple and quick operation, to be carried out for examp…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos