Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Engine oil

To change the engine oil of a KTM Duke 390, start by positioning the motorcycle on a stable surface, preferably using a stand. It is advisable to perform the change with the engine warm, so that the oil is more fluid and can flow more easily. Once the motorcycle is prepared, locate the oil drain plug located under the engine. Using a suitable wrench, carefully unscrew the plug, being careful not to burn yourself if the engine is hot. Make sure to have a bowl under the engine to collect all the old oil. After the oil has stopped flowing, clean the drain plug thoroughly, especially the gasket, and screw it back firmly into place. Once this step is completed, you can start pouring the new oil, being careful not to exceed the maximum level indicated in the motorcycle manual. Remember to use an oil recommended by the manufacturer to ensure optimal performance.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a KTM DUKE 390?
Duke 390 To change the motor oil of the KTM Duke 390, start by briefly warming up the engine to facilitate the flow of the old oil. Turn off the motorcycle an…
How to change the motor oil of a KTM Duke 390?
How to change the motor oil of a KTM Duke 390?
Duke 390 To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine…
How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos