Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the KTM RC 390?

Model: Ktm Rc 390
Part: Service warning light

Video tutorial

In this tutorial, we can see how to reset the service on the KTM RC 390, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First, insert the key, then turn on the instrument panel and navigate to the screen showing the mileage using the "MODE" button.

Scroll through the various options using the "SET" button, reach the service interval, and reset it by holding down the same button. To complete the procedure, simply restart the instrument panel.


Posted on 13 November 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the KTM RC 390?
How to Reset the Service Light on the KTM RC 390?
Rc 390 In this tutorial, you will see how to reset the service light on the KTM RC 390, an extremely simple and quick operation to perform only after comple…
How to reset the service on the KTM RC 390?
How to reset the service on the KTM RC 390?
Rc 390 .. In this tutorial, we will see how to reset the service on the KTM RC 390, a very simple and quick operation that should be done only.. …
How to Change the Time on the KTM RC 390
How to Change the Time on the KTM RC 390
Rc 390 If you own a KTM RC 390 and want to manually change the system time displayed on the central dashboard, read this guide and put the instructions into…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos