Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Rc 200
Part: Brake pads

To replace the front brake pads of the KTM RC 200, you need to loosen the screws that secure the brake caliper to the corresponding disc: this should now be detached from its housing so that the pads inside can be removed from their seat. The pin that locks the pads must be removed so that the old pads can be extracted: the new ones can now be inserted and fixed with the appropriate pin. The new caliper must now be inserted to ensure that everything works correctly.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Front Brake Pads on the KTM RC 200?
How to Replace Front Brake Pads on the KTM RC 200?
Rc 200 In this tutorial, you will see how to replace the front brake pads on the KTM RC 200, a very simple and quick operation. First, position yourself in …
How to Replace the Rear Brake Pads on a KTM RC 200?
How to Replace the Rear Brake Pads on a KTM RC 200?
Rc 200 In this tutorial, you will see how to replace the rear brake pads on a KTM RC 200, a very simple and quick operation. First, position yourself in fro…
How to replace the rear brake pads on the KTM RC 200?
How to replace the rear brake pads on the KTM RC 200?
Rc 200 In this tutorial we can see how to replace the rear brake pads on the KTM RC 200, an extremely simple and quick operation. First of all, position you…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos